How to disable surveillance cameras

[merehan 0]

How to disable surveillance cameras
Surveillance cameras can be disabled by following one of the following methods:

Use of flashlight: A flashlight type (LED) can be used to disable surveillance cameras; This is done by directing the flashlight directly towards the camera lens. It should be noted that this method is effective at night only, as increasing the brightness of the flashlight on the camera leads to better disabling it.

Using laser beams: An infrared laser device can be used and pointed directly at the camera lens. This method can be used both at night and during the day, but it produces better results during the night. The user of this method may face difficulty in determining whether the laser beam is directed correctly. Direct towards the lens or not.

Camera coverage: The ability of cameras to monitor can be disrupted by covering their lens with some material that obstructs the vision process; Gels such as Vaseline, or the camera can be covered with masking tape, or it can be covered completely with a piece of cloth.

How to access surveillance cameras online
Surveillance cameras that have their own IP address can be accessed through the Internet and without the need for any additional software, by following the following steps:

Open Internet Explorer on the user's device.
Write the IP Address of the camera, and the port number of the camera, which is known as the Port Number, in the address bar of the browser.
Press the enter key.
Enter the user name and password, then press enter.

Camera types
Surveillance cameras that are installed can be classified into wired cameras and wireless cameras, and the type of camera to be installed is determined according to the nature of the place in which it will be installed, and the extent of vision to be obtained. higher quality

TRANSLATED FROM:

كاميرا مراقبة تصوير بانورامي موديل زد4

مفتاح ذكي فردي للتحكم في الاضاءة

المنزل الذكي